EN 
ES
PT
SV
DE
TR
FR
YHJART325 Placă turnantă cu plutire cu aer de înaltă precizie
Funcția principală:
It is used as a rotary table part of precision machine tools. Its high precision and clean characteristics are especially suitable for use in ultra-finishing machine tools in the semiconductor industry.
Categorie: Centru de produse
Cuvinte cheie: Yuhuan
Principalele caracteristici
● Precizie ridicată
Due to the error equalization effect of the air-floating turntable, it can achieve the accuracy that cannot be achieved by traditional mechanical turntables.
● Low friction
Since there is no direct contact between the bearing and the turntable shaft, the friction is small and the response to the motor is more timely
● Curat
The air flotation turntable is lubricated by gas, so there is no need to consider the leakage of lubricating fluid, and it is clean during use
● High stiffness
In this bearing, the designed axial stiffness reaches 1200N/μm, and the radial stiffness reaches 260N/μm
Parametru tehnic
| Proiect | Parametru | |
| Standard Edition | Versiunea Actualizate | |
| dimensiunea biroului de lucru | Φ325mm | |
| capacitate maximă | 2000N | |
| Viteza nominală | 100RPM | |
| Cuplu nominal | 19 Nm | |
| radial stiffness | 260N/Чm | |
| Axial stiffness | 1200N/Чm | |
| Maximum allowable partial load (2000N full load) | 60 Nm | |
| Maximum allowable eccentric load (no load) | 45 Nm | |
| Presiunea de alimentare cu aer | 0.5±0.05Mpa | |
| Axial runout error | 1Чm | 0.2Чm |
| Radial runout error | 1.5Чm | 0.5Чm |
| poziționare precisă | 10rad s | 3rad s |
| Repetabilitate | 4rad s | 1.5rad s |
