The machine is suitable for flat machining of 468in silicon carbide, sapphire and gallium nitride. It can achieve high precision and high Surface finish requirements for the end face of parts.
● The bed is made of one-piece welding parts and the column is made of high-grade cast iron. The precision and stability are high. The Welds and castings are treated by second annealing and shot blasting to make the basic parts more stable and reliable.
● The worktable is supported by high precision special turntable bearing, which is driven by servo motor and reducer to ensure the rotating accuracy and stability.
● The angle between the grinding head and the worktable can be adjusted, and the angle can be detected conveniently. It can adapt to different continuous feed grinding modes.
● Equipped with strong magnetic table, and by the program control magnetic.
● The z Axis uses the precision ball screw, collocates the stable reliable servo system, causes the up and down enters the knife to maintain the high accuracy and the high stability.
|Fast-moving speed Z
|200mm / នាទី
|grinding feed speed Z
|0.001-1mm / នាទី
|fast-moving speed of worktable
|1000mm / នាទី
|rotating speed of worktable
|diameter of worktable
|bearing capacity of worktable
|height of worktable
|moving distance of worktable
|table rotating motor
|air pressure source
|main machine area (length × width × height)
|2600 × 1800 × 2950mm
|Z-axis repeated positioning accuracy
|table and Z-axis verticality
|spindle diameter jump
|grinding accuracy (thickness difference)
|≤± ៤ ម
|450×40×360mm（Diamond grinding wheel）