EN 
ES
PT
SV
DE
TR
FR
YH2M8690 Lucidatrice per superfici a posizionamento automatico
Funzione principale:
This equipment is suitable for polishing 2.5D, 3D glass, zirconia, metal and non-metal special-shaped curved surfaces.
Categoria: Centro prodotti
Parole chiave: Yuhuan
Parti tipiche lavorate
Vetro di copertura del telefono cellulare 3d
2.5D Mobile Phone Glass
Punti salienti dell'attrezzatura
● The equipment adopts continuous and uninterrupted polishing, loading and unloading methods, 3 stations for processing and 1 station for loading and unloading.
● The equipment has 3 sets of independent servo lifting processing station loading system, and the loading position of the loading plate is feedback controlled by the motor current.
● The rotation of the lower plate station is driven by a frequency conversion motor + worm gear reducer, and is positioned by a pin.
● This machine is equipped with vacuum air-liquid separation device, real-time monitoring of negative pressure, touch screen + PLC control mode.
Parametro tecnico
Progetto | Unità | Parametro |
product tray | mm | 12xφ420 |
| scan CD | mm | 3xφ920 |
| Upper plate lift motor | kW | 3x2.3 |
| Bottom plate rotation motor (frequency conversion motor) | kW | 4x2.2 |
| Lower plate station conversion motor (frequency conversion motor) | kW | 4.0 |
| Scanning disc motor (frequency conversion motor) | kW | 3x5.5 |
| On the stroke | mm | 200 |
| Lower plate station conversion speed | rpm | 0-10 |
| Bottom plate rotation speed | rpm | 0-40 |
| Scan disc speed | rpm | 0-280 |
| Pressione di alimentazione dell'aria | Mpa | 0.6 |
| Vacuum adsorption pressure | Kpa | -75% |
| power pressure | V | Three-phase five-wire AC380V |
| total equipment power | kW | 36 |
| Total mass of equipment | kg | 4900 |
| Dimensione dell'attrezzatura | mm | 2540x2540x2600 |
