Tots els pobles
ENEN
YUHUAN Co., Ltd.

Inici>Centre de productes>CNC Grinder>Esmoladora d'una sola cara

Centre de productes

https://www.yuhuancnc.com/upload/product/1690273329462177.jpg
YHM7445 Esmoladora vertical d'un sol costat

YHM7445 Esmoladora vertical d'un sol costat


Funció principal:

The machine is suitable for flat machining of 468in silicon carbide, sapphire and gallium nitride. It can achieve high precision and high Surface finish requirements for the end face of parts.


Categoria: Centre de Productes
Paraules clau: Yuhuan

MISSATGE
Peces mecanitzades típiques

imatge-1

Carbur de silici

imatge-2

safirs

imatge-3

Nitrur de gal·li

Característica principal

● The bed is made of one-piece welding parts and the column is made of high-grade cast iron. The precision and stability are high. The Welds and castings are treated by second annealing and shot blasting to make the basic parts more stable and reliable.

● The worktable is supported by high precision special turntable bearing, which is driven by servo motor and reducer to ensure the rotating accuracy and stability.

● The angle between the grinding head and the worktable can be adjusted, and the angle can be detected conveniently. It can adapt to different continuous feed grinding modes.

● Equipped with strong magnetic table, and by the program control magnetic.

● The z Axis uses the precision ball screw, collocates the stable reliable servo system, causes the up and down enters the knife to maintain the high accuracy and the high stability.

paràmetre tècnic
projecteParàmetre
Peça de treballPeça màxima mecanitzadaΦ200mm(8in)
gruix màxim200mm
Eix Z.z-axis stroke200mm
Fast-moving speed Z200mm / min
unitat d'alimentació mínima0.001mm
grinding feed speed Z0.001-1mm / min
taulafast-moving speed of worktable1000mm / min
rotating speed of worktable5-80rpm(Rating50rpm)
diameter of worktable450mm
bearing capacity of worktable300kg
height of worktable900mm
moving distance of worktable300mm
Potència del motormotor de gir15 kW
Motor de l’eix Z1.5 kW
Motor de l'eix X.1.5 kW
table rotating motor1.5 kW


projecteParàmetre
eixEsforç de torsió70 Nm
la font d'energiaFont d'alimentació380V-25kW
air pressure source4-6kgs/cm²(Stable)
dimensiómain machine area (length × width × height)2600 1800 × × 2950mm
pes de la màquinaAbout3.5t
dimensióPrecisió de posicionament de l'eix Z≤0.006mm
Z-axis repeated positioning accuracy≤0.004mm
table and Z-axis verticality0.02mm
spindle diameter jump≤0.003mm
grinding accuracy (thickness difference)≤ ± 0.005 mm
Mola;especificació450×40×360mm(Diamond grinding wheel)
velocitat de rotació50-2800rpm(Adjustable speed)

MISSATGE

Categories populars