Tots els pobles
ENEN
YUHUAN Co., Ltd.

Inici>Centre de productes>Màquina de polir superfície corba

Centre de productes

https://www.yuhuancnc.com/upload/product/1690275085857003.jpg
YHJ2M86108 Màquina de polir superfícies de posicionament automàtica

YHJ2M86108 Màquina de polir superfícies de posicionament automàtica


Funció principal:

The equipment is intermittent multi-station, multi-process, synchronous and efficient surface polishing equipment. The upper disc adopts two independent lifting and adjusting polishing disks, and different consumables can be installed at the same time.


Categoria: Centre de Productes
Paraules clau: Yuhuan

MISSATGE
Peces mecanitzades típiques

imatge-1

Ipad back panel

imatge-2

laptop cover

imatge-3

Powder metallurg

imatge-4

Funda metàl·lica del telèfon mòbil

Aspectes destacats de l'equip

● The equipment is intermittent multi-station, multi-process, synchronous and efficient surface polishing equipment. The upper disc adopts two independent lifting and adjusting polishing disks, and different consumables can be installed at the same time. The lower disc adopts 3 working stations, and 3 working stations are rotated intermittently, which can realize the simultaneous processing of 2 working stations, the 3rd working position is used to take and put the work piece, so as to realize the uninterrupted working mode, and the automatic loading and unloading interface is reserved, which is convenient to realize the full-automatic assembly line operation.

● The device is used to polish the back of ipads, laptop panels, keyboards, polished surfaces of Powder metallurgy cases, mobile phone metal cases, covers, and other hard, brittle materials.

Característica principal

● 3 groups of station lower disc are equipped with independent servo motor drive, which can independently control, speed control and positive and negative rotation.

● Adopt new vacuum adsorption structure and vacuum control system, can control each group of vacuum adsorption independently.

● With a pressure sensor, can real-time monitoring of the product polishing pressure, and real-time adjustment.

● Each upper plate station can be different according to the process requirements, the configuration of different polishing consumables, speed and direction can be independently controlled.

● The lower disc work station can backwash the vacuum pipeline independently, the backwashing pressure is high, the efficiency is fast, the water consumption is reduced greatly.

● With an independent workpiece cleaning and cleaning air cleaning mechanism, so that the finished workpiece more clean.

● The hanging disc has the mechanical safety lock function when the machine stops, prevents the hanging disc falling hidden danger when changing consumables or overhauling.

paràmetre tècnic
projecteParàmetre
Placa SuperiorTwo Φ1088 pieces
lower plate (fixture plate)nine Φ500 pieces
machining sizediameter ≤490mm
polishing consumablesSponge sand, cleaning cloth, carbon brush and other polishing materials
upper plate rotation speed0-118rpm
lower plate rotation speed0-42 rpm
lower plate revolution speed0-14 rpm
upper plate main cylinder diameterΦ125mm
upper plate stroke300mm


projecteParàmetre
upper plate motor3-phase asynchronous frequency conversion speed regulation 4kW1450rpm total 2
lower plate planetary motorServo 2.9 kw 1500rpm total 3
Chassis transposition motorServe 4kW 1500rpm
time setting range0-9999s
Consum d’aire comprimit0.50-0.8Mpa(Gas consumption≤30L/min)
equipment voltage380HZ 50V
potència total de l'equipAbout 22.5kW
dimensions exteriorsAbout Length 2800Xwidth 2900Xheight 3450 (mm)
equipment qualitySobre 7700kg

MISSATGE

Categories populars