YHJ2M86108 Automatic positioning surface polishing machine
The equipment is intermittent multi-station, multi-process, synchronous and efficient surface polishing equipment. The upper disc adopts two independent lifting and adjusting polishing disks, and different consumables can be installed at the same time.
Category: Product Center
Typical Machined Parts
Ipad back panel
Mobile phone metal cover
● The equipment is intermittent multi-station, multi-process,
synchronous and efficient surface polishing equipment. The upper disc
adopts two independent lifting and adjusting polishing disks, and
different consumables can be installed at the same time. The lower disc
adopts 3 working stations, and 3 working stations are rotated
intermittently, which can realize the simultaneous processing of 2
working stations, the 3rd working position is used to take and put the
work piece, so as to realize the uninterrupted working mode, and the
automatic loading and unloading interface is reserved, which is
convenient to realize the full-automatic assembly line operation.
device is used to polish the back of ipads, laptop panels, keyboards,
polished surfaces of Powder metallurgy cases, mobile phone metal cases,
covers, and other hard, brittle materials.
● 3 groups of station lower disc are equipped with independent servo motor drive, which can independently control, speed control and positive and negative rotation.
● Adopt new vacuum adsorption structure and vacuum control system, can control each group of vacuum adsorption independently.
● With a pressure sensor, can real-time monitoring of the product polishing pressure, and real-time adjustment.
● Each upper plate station can be different according to the process requirements, the configuration of different polishing consumables, speed and direction can be independently controlled.
● The lower disc work station can backwash the vacuum pipeline independently, the backwashing pressure is high, the efficiency is fast, the water consumption is reduced greatly.
● With an independent workpiece cleaning and cleaning air cleaning mechanism, so that the finished workpiece more clean.
● The hanging disc has the mechanical safety lock function when the machine stops, prevents the hanging disc falling hidden danger when changing consumables or overhauling.
|Upper Plate||Two Φ1088 pieces|
|lower plate (fixture plate)||nine Φ500 pieces|
|machining size||diameter ≤490mm|
|polishing consumables||Sponge sand, cleaning cloth, carbon brush and other polishing materials|
|upper plate rotation speed||0-118rpm|
|lower plate rotation speed||0-42 rpm|
|lower plate revolution speed||0-14 rpm|
|upper plate main cylinder diameter||φ125mm|
|upper plate stroke||300mm|
|upper plate motor||3-phase asynchronous frequency conversion speed regulation 4kW1450rpm total 2|
|lower plate planetary motor||Servo 2.9 kw 1500rpm total 3|
|Chassis transposition motor||Serve 4kW 1500rpm|
|time setting range||0-9999s|
|Compressed air consumption||0.50-0.8Mpa（Gas consumption≤30L/min）|
|equipment voltage||380V 50HZ|
|total equipment power||About 22.5kW|
|external dimensions||About Length 2800Xwidth 2900Xheight 3450 （mm）|
|equipment quality||About 7700kg|